Study of effect of nanofluid concentration on response characteristics of machining process for cleaner production

Created by W.Langdon from gp-bibliography.bib Revision:1.8051

@Article{Garg:2016:JCPb,

• author = "Akhil Garg and Shrutidhara Sarma and B. N. Panda and Jian Zhang2 and L. Gao",
• title = "Study of effect of nanofluid concentration on response characteristics of machining process for cleaner production",
• journal = "Journal of Cleaner Production",
• year = "2016",
• volume = "135",
• pages = "476--489",
• month = "1 " # nov,
• ISSN = "0959-6526",
• DOI = "doi:10.1016/j.jclepro.2016.06.122",
• URL = "http://www.sciencedirect.com/science/article/pii/S0959652616307995",
• abstract = "With the ever-increasing concern for reducing environmental pollution and waste minimization, {"}green manufacturing{"} has been successful to draw sufficient amount of attention towards it. Minimum Quantity Lubrication (MQL) is one such technique that has revolutionized the manufacturing industry by not only reducing the amount of working fluid dramatically but also enhancing cutting tool life and reducing material costs. Past studies have reported the use of experiments in MQL based manufacturing but limited computational modeling for optimizing the process parameters Based on the past experimental procedure of machining process (micro-drilling), a computational framework such as Adaptive Neuro Fuzzy Inference System (ANFIS) and Genetic Programming (GP) in quantification of three response characteristics (torque, thrust forces and material removal rate (MRR) is proposed. The performance analysis based on the cross-validation, error metrics, curve fitting and hypothesis tests reveals that among the two models, the GP models have performed better. 2-D and 3-D surface analysis were performed to validate the robustness of the models. Among the three response characteristics, It was found that the nanofluid concentration influences torque the most, which is an important aspect for power consumption. At nanofluid concentration values of 1.4 and 4, the minimum values of torque and thrust forces is achieved respectively. When drill diameter is minimum and the spindle speed is maximum, the values of torque, thrust forces and MRR is the lowest. Thus, the feed rate, nanofluid concentration and drill diameter are most critical for obtaining higher MRR and lower values of torque and thrust force, thus enabling cleaner production and environment.",
• keywords = "genetic algorithms, genetic programming, Minimum quality lubrication, Green manufacturing, Micro-drilling process, Torque, Drill diameter",

}

Genetic Programming entries for Akhil Garg Shrutidhara Sarma Biranchi Narayan Panda Jian Zhang2 Liang Gao

Citations